IC-706 MK II

ICOM
IC-706 MK II

Specifications

Prices

The IC-706 Mark-II is a compact all-mode transceiver with up to 100 Watt on HF/50 MHz and 20 Watt on 144 MHz band. Features: Detachable front panel, Receive frequency coverage 30 kHz to 200 MHz, 1 Hz min tuning step, IF Shift, RIT, NB, RF preamplifier, VOX, Speech Compressor, CW Keyer, Power/ALC/SWR meter, Mini Spectrum Scope. Ideated in Japan, year of introduction 1997.

Reference market : amateur-radio

IC-706 MK II specifications

General

Frequency coverage
Receive [1]	0.0300 ~ 200.0000 MHz
Transmit	1.8000 ~ 1.9999 MHz 3.5000 ~ 3.9999 MHz 7.0000 ~ 7.3000 MHz 10.1000 ~ 10.1500 MHz 14.0000 ~ 14.3500 MHz 18.0680 ~ 18.1680 MHz 21.0000 ~ 21.4500 MHz 24.8900 ~ 24.9900 MHz 28.0000 ~ 29.7000 MHz 50.0000 ~ 54.0000 MHz 144.0000 ~ 148.0000 MHz [2]
Mode
CW / FSK (RTTY) / LSB / USB / AM / FM / WFM
Tuning step
1 / 10 / 100 Hz / 1 / 5 / 9 / 10 / 12.5 / 15 / 20 / 100 kHz. 1 MHz (quick tuning step)

Receiver

Sensitivity
CW / SSB	<0.15 uV (1.8~28 MHz, 10dB S/N, pre ON) [3] <0.15 uV (28~30 MHz, 10dB S/N, pre ON) <0.12 uV (50~54 MHz, 10dB S/N, pre ON) <0.11 uV (144~148 MHz, 10dB S/N, pre ON)
AM	<13.0 uV (0.5~1.8 MHz, 10dB S/N) <2.0 uV (1.8~28 MHz, 10dB S/N, pre ON) [3] <2.0 uV (28~30 MHz, 10dB S/N, pre ON) <1.0 uV (50~54 MHz, 10dB S/N, pre ON) <1.0 uV (144~148 MHz, 10dB S/N, pre ON)
FM	<0.5 uV (28~30 MHz, 12 dB SINAD, pre ON) <0.25 uV (50~54 MHz, 12 dB SINAD, pre ON) <0.18 uV (144~148 MHz, 12 dB SINAD, pre ON)
WFM	<10 uV (76~108 MHz, 12 dB SINAD, pre ON)
Selectivity
CW-N 1 [4]	250 Hz (-6dB)
CW-N 2 [5]	500 Hz (-6dB)
RTTY-N 2 [6]	350 Hz (-6dB)
SSB-N [7]	1.9 kHz (-6dB)
SSB-W [8]	2.8 kHz (-6dB)
CW / SSB / RTTY	>3.0 KHz (-6dB) <4.8 KHz (-60dB)
AM / FM-N	>8.0 KHz (-6dB) <30.0 KHz (-40dB)
FM	>12.0 KHz (-6dB) <30.0 KHz (-60dB)
RF preamplifier
Yes
RF attenuator
20 dB
Spurious and image rejection
>70 dB (HF/50 MHz) [9] >60 dB (144 MHz, FM mode)
IF-shift range
±1.2 kHz (15 Hz step SSB / CW / RTTY) ±250 Hz (3 Hz step, CW-N / RTTY-N)
NB (Noise Blanker)
Yes
RIT (Receiver Incremental Tuning)
±9.99 kHz (10 Hz step)
AGC (Automatic Gain Control)
Fast, slow
Frequency stability
±7 ppm from 1' to 60' after power on. ±1 ppm/hr with temperature +25°C after 60' power on. ±5 ppm with temperature from 0°C to +50°C after 60' power on. ±0.5 ppm with temperature from -30°C to +60°C [10]
IF (Intermediate Frequency)
1°	70.7000 MHz (WFM) 69.0100 MHz (AM / FN-N) 69.0105 MHz (RTTY) 69.0106 MHz (CW) 69.0115 MHz (SSB / FM)
2°	10.7000 MHz (WFM) 9.0100 MHz (AM / FN-N) 9.0105 MHz (RTTY) 9.0106 MHz (CW) 9.0115 MHz (SSB / FM)
3°	455 kHz (FM-N / FM)
Squelch sensitivity
SSB	<5.6 uV (pre ON)
FM	<0.32 uV (pre ON)
CW features
Pitch control 300~900 Hz LSB/USB reverse mode

Transmitter

Output power
HF	5 ~ 100 W (SSB / CW / FM / RTTY) 2 ~ 40 W (AM)
50 MHz	5 ~ 100 W (SSB / CW / FM / RTTY) 2 ~ 40 W (AM)
144 MHz	2 ~ 20 W (SSB / CW / FM / RTTY) 2 ~ 8 W (AM)
Spurious emission
<-50 dBc (HF) <-60 dBc (50 MHz) <-60 dBc (144 MHz)
Carrier suppression (SSB)
>40 dB
Unwanted sideband suppression (SSB)
>50 dB
Microphone
600Ω
CW features
Full break-in / Semi break-in 6~60 wpm Keyer / 2.8~4.5 weight
FSK features
1615 / 2125 Hz mark 170 / 200 / 425 Hz shift

Features

Memory
99 regular memories 2 for programmed scan limits 1 call channel
Display
1 Hz frequency resolution 15-segments signal meter bar
Selective calling
1750 Hz tone CTCSS 50-tones [11]
Antenna
SO239 50Ω (Ant-1, below 60 MHz) SO239 50Ω (Ant-2, above 60 MHz)
Power supply
13.8 VDC (±15%)
Power consumption
1.8A RX (squelched) 2.0A RX (max audio) 20A TX (100 Watt)
Audio power
>2W on 8Ω
Audio output
Jack 3.5 mm (headphone) Jack 3.5 mm (4~16Ω external speaker)
Connections
Jack 8-pin (mic) Jack 3.5 mm (CI-V / PC) Jack 3.5 mm (RTTY) Jack 6.35 mm (CW keyer) 13-pin DIN (ACC / TNC)

Mechanical and environmental data

Operating temperature
from -10°C to +60°C
Dimensions
167 (W) x 58 (H) x 200 (D) mm, projections not included
Weight
2.45 kg

Range restricted in some versions.
European version 144~146 MHz.
Except 4~4.5 MHz and 8~9 MHz.
With optional FL-101 filter.
With optional FL-100 filter.
With optional FL-232 filter.
With optional FL-223 filter.
With optional FL-103 filter.
Except IF through on 50 MHz.
With optional CR-502 high stability TCXO unit.
With optional UT-86 unit.

IC-706 series :

The ICOM's base model IC-706, first introduced in 1995, was upgraded with the IC-706 MK II (IC-706 Mark 2) model two years later. The MK II added more features and more power, with up to 20 Watt on 144 MHz band and the DSP module as optional equipment. The latest version IC-706 MK IIG (IC-706 Mark 2G) adds other features and capabilities as the 440 MHz band for a complete HF/VHF/UHF transceiver.

IC-706 MK II optional IF filter :

ICOM IC-706MK-II optional IF filter:
After filter installation, specify the installed filter (FL-100/101/103/223/232) using initial set mode. These filters can be installed in either direction.

IC-706 MK II top view :

ICOM IC-706MK-II top view with the IF filter unit

IC-706 MK II bottom view :

ICOM IC-706MK-II bottom view

IC-706 MK II price

We have collected for your convenience the ICOM IC706-Mark2 sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price	Date	Condition
USD 589.95	2017-sep	Second Hand The condition is fair, with some scratches. Comes with HM-103 hand mic, owner's manual, box

IC-706 MK II review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.