FTM-300D

Specifications    Prices

C4FM / FM dual band 144 / 430 mobile transceiver with high-resolution full-color display. Two independent receiver circuits, 5 to 50 Watt RF power output, 1200 / 9600bps APRS data communication. New memory auto grouping function, snapshot feature, built-in GPS. Ideated in Japan, year of introduction 2020.

Reference market : amateur-radio

FTM-300D specifications

General
Frequency coverage
Receive108.0000 ~ 999.9900 MHz [1]
Transmit144.0000 ~ 146.0000 MHz [2]
144.0000 ~ 148.0000 MHz
430.0000 ~ 440.0000 MHz [2]
430.0000 ~ 450.0000 MHz
Mode
AM / FM / C4FM
Tuning step
5 / 6.25 / 8.333 [3] / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz
Receiver
Sensitivity
AM0.8 uV (108~137 MHz, 10dB S/N)
0.8 uV (300~336 MHz, 10dB S/N)
FM0.2 uV (137~150 MHz, 12dB SINAD)
0.25 uV (150~174 MHz, 12dB SINAD)
0.3 uV (174~222 MHz, 12dB SINAD)
0.25 uV (222~300 MHz, 12dB SINAD)
0.25 uV (336~420 MHz, 12dB SINAD)
0.2 uV (420~520 MHz, 12dB SINAD)
0.4 uV (800~900 MHz, 12dB SINAD)
0.8 uV (900~1000 MHz, 12dB SINAD)
C4FM0.19 uV (BER 1%)
Selectivity
AM12 KHz (-6dB)
30 KHz (-60dB)
FM12 KHz (-6dB)
30 KHz (-60dB)
Frequency stability
± 2.5 ppm max with temperature from -20°C to +60°C
IF (Intermediate Frequency)
58.050 MHz (A band)
57.150 MHz (B band)
450 KHz (A and B band)
Transmitter
Output power
FM5 / 25 / 50 W
C4FM5 / 25 / 50 W
Spurious emission
< -60 dB
Maximum deviation (FM)
± 5 KHz
Microphone
2kΩ
Features
Memory
999 regular memories
5 home memories
50 pair for scan limits
Display
1 kHz frequency resolution
40-segments signal meter bar
Selective calling
CTCSS / DCS / 1750 Hz tone
Antenna
50Ω
Power supply
13.8 VDC nominal
Power consumption
500mA RX, typ
11A TX, max power
Audio power
3 W on 8Ω
Audio output
2 x Jack external speaker
Connections
DATA (microphone with snapshot / PC)
DATA USB (PC)
DATA miniDIN (remote operation, PC)
GPS (9600bps)
Mechanical and environmental data
Operating temperature
from -20°C to +60°C
Dimensions
Controller139 (W) x 53 (H) x 18 (D) mm, without knobs
Radio unit139 (W) x 42 (H) x 132 (D) mm, without fan
Weight
1.1kg

  1. USA version cellular band blocked.
  2. EU version.
  3. For Air-band only.
FTM-300D description :

The Yaesu FTM-300D (FTM-300DE in Europe, FTM-300DR in USA / Asia / Australia) provides stable, and reliable, 50 Watt of RF power and is equipped with a heavy-duty heat sink that includes the air-convection conductor tunnel. The transceiver supports full dual-band operation with two independent receivers and thus simultaneous C4FM digital monitoring for both the bands. The FTM300 supports both the WiRES-X Portable Digital Node function and Fixed Node function (with the HRI-200). Since simultaneous C4FM monitoring on both VFOs is possible, users can enjoy both WiRES-X communications on one channel while monitoring a local voice channel at the same time. An 5.1cm (2-inch) color TFT Display clearly highlights the frequency and operation bands, also with the Band Scope users can monitor more channels centered around the current VFO frequency. Memory grouping is one of the advanced features of the FTM-300D, channels are automatically categorized and quickly recalled by four band and groups.

FTM-300D features :

  • Wideband reception from 108 MHz to 1 GHz.

  • Analog FM and Digital communication using Yaesu C4FM (quaternary FSK) system.

  • AMS (Automatic Mode Select) feature that automatically select the FM or the C4FM modes according to the signal of the other station.

  • Simultaneous reception of two separate frequencies, on different bands, or within the same band (V+V, V+U, U+U).

  • MAG (Memory Auto Grouping), the memory channels are automatically categorized in each band so that channels can be easily and quickly recalled.

  • E2O-II (Easy to Operate - II), which enables easier and smoother operation of frequently used functions, such as direct frequency input, memory channel recall, and signaling changes.

  • MCS (Multi Channel Standby), a convenient function that can automatically watch multiple memory channels that are registred in each group.

  • DG-ID (Digital Group ID) and GM (Group Monitor) features enable locating and communicating with other stations that are within contact range and have the corect matching number.

  • 5.1 cm high resolution QVGA full-color display shows the communication status and settings, for each band.

  • Bandscope that displays 61 channels.

  • Built-in 66 CH high-sensitivity GPS unit permits display of the current location and heading information.

  • Built-in Bluethooth supports hands-free communication.

  • Snapshot function with the optional camera/microphone MH-85.

  • APRS with standard 1200 / 9600bps AX25 modem.

  • 3 Watts audio power speaker.

  • With 2 external audio jacks users can output the VFO-A and VFO-B receiver to separate speakers or mix A & B signals when a single external speaker is used.

  • Voice recording of both received and transmitted audio.

  • microSD memory card slot.

  • Save and load data, including configuration and memory channel information, to a microSD card.

FTM-300D hands-free operation :

The transceiver enables wireless operation using the optional Yaesu Bluetooth headset SSM-BT10. The headset is equipped with a PTT button and supports VOX (voice activated transmission) function which enables the hands-free operation while operating mobile. The Bluetooth headset SSM-BT10 can be charged by connecting to the DATA jack on the right side of the panel using the optional charging cable SCU-41.

Yaesu SSM-BT10 Bluetooth Headset
Yaesu SSM-BT10 Bluetooth Headset

When the power is turned OFF while the Bluetooth headset is connected, the next time the power is turned ON, the same headset is searched for and automatically connected when found.

FTM-300D memory auto grouping function :

The new Memory Auto Grouping (MAG) function allows for Memory channels to be automatically categorized in each band, and memory channels can be easily and quickly recalled by Band groups. If you press the "BAND" key while operating on a memory channel, the bands switch in the order of M-ALL > M-AIR > M-VHF > M-UHF > M-GEN > M-GRP. Only memory channels of that frequency band may be automatically grouped and recalled. With M-ALL, band grouping is turned Off and all memory channels can be called in numerical order.

Yaesu FTM-300 Memory Auto Grouping function
Yaesu FTM-300 Memory Auto Grouping function

FTM-300D band scope :

You can visually monitor the signal information in both VFO mode and Memory Channel mode at high speed, in real time. VFO mode, the status (strengths) of the signals in the upper and lower frequency channels (31 / 61 CH) centered on the current receive frequency are displayed in the graph. Memory Mode, the status (strengths) of the signals in the upper and lower memory channels (11 / 21 CH) centered on the current memory channel are displayed in the graph.

Yaesu FTM-300 Band Scope
Yaesu FTM-300 Band Scope

FTM-300D GPS and APRS :

A high-sensitivity 66 channel GPS receiver is installed in the FTM-300D's Control Panel to greatly improve the position information acquisition time and accuracy. In C4FM digital mode, the position and direction of the contacted stations are displayed in real time in conjunction with the voice communications. The transceiver also supports a GPS logging function, which can display GPS acquisition information, also the location and the trajectory information of your own station. GPS data may be display with PC software. In addition, the Control Panel has an external connection terminal for attachment of an external GPS device.

Yaesu FTM-300 GPS satellite Capture Status Display and APRS Display
Yaesu FTM-300 GPS satellite Capture Status Display (left) and APRS Display (right)

1200 and 9600 bps APRS data communication. You will be able to display the APRS information / display the station list / send and receive messages / use the Smart Beaconing function / track your APRS movement on the Internet websites.

FTM-300D price

We have collected for your convenience the Yaesu FTM300 sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price Date Condition
USD 459.95 2023-mar Brand-new
USD 523.00
(449EUR)
2020-jun Brand-new

FTM-300DE version

FTM-300D review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.

Newsletter RadioMasterList.com

Thank you

Good, old times:
Grundig, the flagship receiver
Satellit 3400
FM, LW, MW, 1.6-30 MHz

Recent YAESU direct-sampling transceiver
FT-710
HF/50/70 MHz, 102dB IMDR, 100 Watt

Aeronautical HF Frequency List 2023
New eBook
All the frequencies, all the Countries

USA Ham Repeaters
Pennsylvania
And Maryland, New York, Virginia ...

Most view radios
RadioMasterList.com

Most view radios
RadioMasterList.com

Top