FTM-10SR / SE

Yaesu
FTM-10SR / SE

Specifications

Prices

Dual-band FM mobile transceiver. Waterproof front panel separated from the main unit providing many mounting options even for motor cycles and off-road vehicles. 10 Watts on VHF, 7 Watts on UHF, simple set-up and no microphone or curl cord needed, battery voltage display, wireless cloning feature. Ideated in Japan, year of introduction 2007.

Reference market : amateur-radio

FTM-10SR / FTM-10SE specifications

General

Frequency coverage
Receive	108.0000 ~ 222.0000 MHz 300.0000 ~ 999.0000 MHz [1]
Receive (AM/FM radio)	0.5000 ~ 1.8000 MHz 76.0000 ~ 108.0000 MHz
Transmit	144.0000 ~ 148.0000 MHz 430.0000 ~ 450.0000 MHz
Mode
AM [2] / FM / WFM [2]
Tuning step
5 / 6.25 / 8.33 / 9 [3] / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 / 200 kHz / 1 MHz

Receiver

Sensitivity
AM	5 uV (0.5~1.8 MHz, 10dB S/N). 0.8 uV (108~137 MHz, 10dB S/N). 0.8 uV (300~336 MHz, 10dB S/N).
FM	0.2 uV (137~150 MHz, 12dB SINAD). 0.25 uV (150~174 MHz, 12dB SINAD). 0.25 uV (336~420 MHz, 12dB SINAD). 0.2 uV (420~470 MHz, 12dB SINAD). 0.4 uV (800~900 MHz, 12dB SINAD). 0.8 uV (900~999 MHz, 12dB SINAD).
WFM	2 uV (76~108 MHz, 12dB SINAD). 1 uV (174~222 MHz, 12dB SINAD). 5 uV (470~800 MHz, 12dB SINAD).
Selectivity
AM / FM	12 kHz (-6dB) 30 kHz (-60dB)
Frequency stability
± 5ppm with temperature from -10°C to +60°C
IF (Intermediate Frequency)
1°	45.80 MHz (WFM) 47.25 MHz (AM / FM) 130 kHz (76~108 MHz, FM radio) 50 kHz (0.5~1.8 MHz, AM radio)
2°	10.7 MHz (WFM) 450 kHz (AM / FM)
3°	1 MHz (WFM)
Squelch sensitivity
FM	<0.16 uV (144 and 430 MHz band)

Transmitter

Output power
144 MHz	10 / 3 / 0.5 W
430 MHz	7 / 3 / 0.5 W
Spurious emission
>-60 dB
Maximum deviation (FM)
±5 kHz max
Microphone
2kΩ

Features

Memory
500 regular memories. 31 smart-search memories. 10 pre-programmed "weather broadcast" channels.
Display
1 kHz frequency resolution 4-segments signal meter bar
Selective calling
CTCSS / DCS DTMF 1750 Hz
Antenna
SMA 50Ω
Power supply
13.8 VDC nominal 11.7~15.8 VDC operating
Power consumption
300mA RX, typ. 2A TX, 10W @ 144 MHz (external speaker OFF). 2A TX, 7W @ 430 MHz (external speaker OFF). 2.4A TX, 10W @ 144 MHz (external speaker ON). 2.4A TX, 7W @ 430 MHz (external speaker ON).
Audio power
4 W on 4Ω (normal speaker) 8 W on 4Ω (BTL speaker)
Audio output
Jack 3.5 mm stereo (external speaker)
Connections
Jack 3.5 mm (line input) Jack (microphone)

Mechanical and environmental data

Operating temperature
from -20°C to +60°C
Dimensions
Transceiver body	130 (W) x 28 (H) x 82 (D) mm without connectors
Front panel	112 (W) x 37.6 (H) x 41 (D) mm without knobs
Weight
Transceiver body	460g
Front panel	210g with control cable

USA cellular blocked.
Receive only.
AM radio only.

FTM-10 series :

The FTM-10SR transceiver is the USA version, with cellular band blocked. The FTM-10SE transceiver is the EUR version, without frequencies blocked.

The FTM-10R / E transceiver higher power version is 50 Watts on 2 meters and 40 Watts on 70cm. The case is more bulky. It can be mounted right on car.

FTM-10SR / FTM-10SE connection and setting :

Yaesu FTM-10S connection and setting:
If you do not use the connector, attach the supplied rubber-cap to the connector. To mount on a motorcycle, a screw hole is provided.

FTM-10SR / FTM-10SE price

We have collected for your convenience the Yaesu FTM10S sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price	Date	Condition
USD 437.00 (319GBP)	2021-aug	Brand-new
USD 446.00 (379EUR)	2021-aug	Brand-new

FTM-10SR / FTM-10SE review

Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.