FT-DX9000MP
Elite Class Yaesu HF/50 MHz transceiver. 400 Watts of power output, full duplex operation, two independent receivers, external power supply with dual speakers, and much more! 3rd-order Intercept Point in excess of +40 dBm, Blocking Dynamic Range 150 dB. Four analog meters, four RX/TX antenna connectors, 160 to 6 meters variable preselector filter. Ideated in Japan, year of introduction 2004.
Reference market : amateur-radio
FT-DX9000MP specifications
General |
Frequency coverage | |
---|---|
Receive | 0.0300 ~ 60.0000 MHz [1] |
Transmit | 1.8000 ~ 2.0000 MHz
3.5000 ~ 4.0000 MHz 5.1675 MHz [2] 5.3 MHz band [3] 7.0000 ~ 7.3000 MHz 10.1000 ~ 10.1500 MHz 14.0000 ~ 14.3500 MHz 18.0680 ~ 18.1680 MHz 21.0000 ~ 21.4500 MHz 24.8900 ~ 24.9900 MHz 28.0000 ~ 29.7000 MHz 50.0000 ~ 54.0000 MHz |
Mode | |
CW / FSK (RTTY) / LSB / USB / AM / FM | |
Tuning step | |
1 / 5 / 10 / 100 Hz / 1 / 2.5 / 5 / 6.25 / 9 / 10 / 12.5 / 20 / 25 / 100 KHz / 1 MHz |
Receiver |
Sensitivity | |
---|---|
SSB [4] | 0.2 uV (1.8~30 MHz amateur bands, 10dB S+N/N).
0.125 uV (50 MHz amateur band, 10dB S+N/N). 2 uV (0.1~50 MHz, 10dB S+N/N). |
AM [5] | 3.2 uV (0.1~1.8 MHz, 10dB S+N/N).
2 uV (1.8~30 MHz, 10dB S+N/N). 1 uV (50 MHz amateur band, 10dB S+N/N). |
FM [6] | 0.5 uV (28 MHz amateur band, 12dB SINAD).
0.35 uV (50 MHz amateur band, 12dB SINAD). |
Selectivity | |
CW/RTTY/PKT [7] | >0.50 kHz (-6dB)
<0.75 kHz (-60dB) |
SSB [7] | >2.4 kHz (-6dB)
<3.6 kHz (-60dB) |
AM [7] | >9 kHz (-6dB)
<18 kHz (-60dB) |
FM [7] | >15 kHz (-6dB)
<25 kHz (-60dB) |
RF preamplifier | |
Yes | |
RF attenuator | |
3 / 6 / 12 / 18 dB | |
DR (Dynamic Range) | |
110 dB (100 KHz spaced signals, 14 MHz, IPO On) | |
Blocking | |
132 dB (10 KHz spaced signal, 14 MHz, IPO On).
150 dB (100 KHz spaced signal, 14 MHz, IPO On). |
|
IP3 (3rd order intercept point) | |
+40 dBm (100 KHz spaced signals, 14 MHz, IPO On) | |
Image rejection | |
>70 dB (1.8~30 MHz amateur bands) | |
IF-shift range | |
±1 KHz (20Hz steps) | |
Notch filter | |
Manual | ~70 dB (wide / narrow) |
Automatic | Yes |
NB (Noise Blanker) | |
Level adjustable, wide / narrow mode | |
DNR (Digital Noise Reduction) | |
Level adjustable | |
RIT (Receiver Incremental Tuning) | |
±9.999 KHz | |
AGC (Automatic Gain Control) | |
Off, sloped, slow, fast (time settings adjustable) | |
Frequency stability | |
± 0.03ppm with temperature from -10°C to +60°C after 5' warm-up | |
IF (Intermediate Frequency) | |
1° | 40.455 MHz (VFO-A)
40.450 MHz (VFO-B) |
2° | 455 kHz (VFO-A)
450 kHz (VFO-B) |
3° | 30 kHz (all modes except for FM).
24 kHz (FM) |
IF roofing filter | |
3 / 6 / 15 kHz | |
CW features | |
Zero-beating display.
Adjacent channel monitor (ACM). Audio peak filter (APF). Semi break-in / full break-in. U/LSB mode reversal. Pitch control (300~1050Hz, 50Hz steps). |
|
FSK features | |
High / low tone.
Polarity reversal. |
Transmitter |
Output power | |
---|---|
CW / FSK / SSB / FM | 10 ~ 400 W |
SSB | 10 ~ 100 W (class A mode) |
AM | 10 ~ 100 W |
Spurious emission | |
Harmonics | <-60 dB (1.8~30 MHz amateur bands).
<-70 dB (50 MHz amateur band). |
Carrier suppression (SSB) | |
<-70 dB | |
Unwanted sideband suppression (SSB) | |
<-80 dB | |
Intermodulation products (SSB) | |
-31 dBc (400W PEP).
-50 dBc (100W PEP, class A mode). |
|
Maximum deviation (FM) | |
± 2.5 kHz (narrow)
± 5.0 kHz (wide) |
|
Audio response | |
400~2600 Hz (-6 dB, SSB) | |
Microphone | |
600Ω (200Ω to 10kΩ) | |
XIT (Transmitter Incremental Tuning) | |
±9.99 kHz | |
CW features | |
4~60 WPM keyer
Straight / Iambic key Iambic ACS selection 30-3000ms CW-VOX delay |
|
Antenna tuner | |
Impedance range | 16.7 ~ 150Ω (1.8~30 MHz amateur bands).
25 ~ 100Ω (50 MHz amateur band) |
Channel memory | 100 (one for band and 89 for most-recent tuning points) |
Features |
Memory | |
---|---|
99 regular memories, up to 6 groups.
9 pairs for programmed scan limits. 5 quick memories (QMB). 3 band-stack for each band in the VFO registers. | |
Display | |
1 Hz frequency resolution | |
Selective calling | |
CTCSS | |
Antenna | |
4 x SO239 50Ω
1 x SO239 50Ω (receive only) |
|
Power supply | |
90 ~ 264 VAC [8] | |
Power consumption | |
100 VA, RX (no signal)
120 VA, RX (signal present) 1000 VA, TX (400W @ 117VAC) |
|
Audio power | |
2.5 W on 4Ω
7 W on 8Ω [8] |
|
Audio output | |
Jack 6.35 mm headphone | |
Connections | |
DB-9 RS232C (CAT, PC)
USB (keyboard) RCA (PTT) RCA (Patch - audio input) RCA (Transverter output) RCA (ALC) RCA (TX active) RCA (+13.8VDC, 200mA) Jack 3.5 mm (VFO-A/B line output) Jack 3.5 mm (audio output - future use) Jack 3.5 mm (audio input) Jack 3.5 mm (Control keypad) 2 x Jack 3.5 mm (VFO-A/B external speaker) Jack 6.35 mm (key, front panel) Jack 6.35 mm (key, rear panel) 4-pin Jack (RTTY TNC) 5-pin Jack (Packet TNC) 6-pin Jack (PS2 keyboard) 7-pin Jack (COM, GPS data) 7-pin Jack (band data 2, power amplifier) 8-pin Jack (band data 1, power amplifier) 8-pin Jack (microphone) 15-pin Jack (display) 6-pin miniDIN (antenna rotator) XLR (microphone, front panel) 2 x BNC (RX antenna output) |
Mechanical and environmental data |
Operating temperature | |
---|---|
from -10°C to +60°C | |
Dimensions | |
Transceiver | 518 (W) x 165 (H) x 438.5 (D) mm |
Power supply | 246 (W) x 165 (H) x 438 (D) mm |
Weight | |
Transceiver | 29 kg |
Power supply | 10.5 kg |
- 1.8~54 MHz specified performance guaranteed, amateur bands only.
- Alaska emergency channel, USA version only.
- 5 channels for UK version, 7 channels for USA version.
- 2.4 kHz bandwidth, IPO Off.
- 6.0 kHz bandwidth, IPO Off.
- 15 kHz bandwidth, IPO Off.
- Width on "center", VRF Off, u-Tune Off.
- FPS-9000H power supply unit with dual speakers and audio filters.
The FT-DX-9000MP transceiver version provide 400 Watts of power output and comes with: external 50V / 24A switching power supply and speaker, two pairs of analog meters, LCD window, data managment unit (DMU) and flash memory slot built-in, Main / Sub receiver variable RF filters (VRF), full dual receive capability. TFT and u-Tune are optionals.
The FT-DX-9000D transceiver version provide 200 Watts of power output and comes with: internal 50V / 12A switching power supply, large high-resolution and multi-function TFT display, data managment unit (DMU) and flash memory slot built-in, Main / Sub receiver variable RF filters (VRF), full dual receive capability, three u-Tuning modules for main receiver 160-20 meter bands.
The FT-DX-9000 Contest transceiver, custom-configurable version, provide 200 Watts of power output and comes with: internal 50V / 12A switching power supply, two pairs of analog meters, LCD window, variable RF filter (VRF), three Key jacks and two headphone jacks. DMU, TFT, RXU (dual-receive) and u-Tune are optionals.
FT-DX9000MP power module :
Yaesu FT-DX9000MP, 4 x 2SD2931 MOSFET produce 400W of output power
FT-DX9000MP and power supply/speaker :
Yaesu FT-DX9000MP, external 50V/24A switching power supply with dual speakers and audio filters
FT-DX9000MP price
We have collected for your convenience the Yaesu FTDX9000MP sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
Price | Date | Condition |
USD 9600.00 (6999GBP) |
2021-jun |
Second Hand Excellent condition. Boxed and complete with all the original parts and manuals. Includes additional features of PEP9000 performance enhancement program |
USD 6850.00 | 2013-dec |
Second Hand Perfect. With accessories and extras in excellent condition. The radio comes with the manual, FH-2 remote keypad, memory card and the 50V power supply/speaker. Original Boxes. |
FT-DX9000MP review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.