FT-1000MP Mark V Field

Specifications    Prices

High-performance, self-contained, 100 Watts HF transceiver. Ready for operation either from VAC or from VDC power, with the AC power supply being built-in. For those who want the very best at home, for field-day or on a DX-pedition. Two receivers, variable RF preselector filter on the 160-20m amateur bands, combined system with IF analog and DSP filtering, enhanced digital signal processing, easy digital-mode (PSK31, RTTY, HF Packet, etc) interfacing, low-distortion push-pull power amplifier, automatic antenna tuner, CAT system. Ideated in Japan, year of introduction 2002.

Reference market : amateur-radio

FT-1000MP Mark V Field specifications

General
Frequency coverage
Receive0.1000 ~ 30.0000 MHz
Transmit1.5000 ~ 1.9999 MHz
3.5000 ~ 3.9999 MHz
7.0000 ~ 7.4999 MHz
10.0000 ~ 10.4999 MHz
14.0000 ~ 14.4999 MHz
18.0000 ~ 18.4999 MHz
21.0000 ~ 21.4999 MHz
24.5000 ~ 24.9999 MHz
28.0000 ~ 29.9999 MHz
Mode
CW / FSK / LSB / USB / AM / AM-S / FM
Tuning step
0.625 / 1.25 / 2.5 / 5 / 10 / 100 Hz / 1 / 9 kHz
1 ~ 100 kHz (channel stepping)
100 kHz / 1 MHz (DOWN & UP buttons)
Receiver
Sensitivity [1]
CW / SSB2.0 uV (0.5~1.8 MHz, 10dB S/N)
0.16 uV (1.8~30 MHz, 10dB S/N)
AM13.0 uV (0.5~1.8 MHz, 10dB S/N)
2.0 uV (1.8~30 MHz, 10dB S/N)
FM0.5 uV (1.8~30 MHz, 12dB SINAD)
Selectivity
CW-N / RTTY-N250 Hz (-6dB)
700 Hz (-60dB)
CW / RTTY / Packet500 Hz (-6dB)
1800 Hz (-60dB)
SSB1.8 kHz (-6dB)
3.6 kHz (-60dB)
SSB / AM-N2.2 kHz (-6dB)
4.2 kHz (-60dB)
AM-W4 kHz (-6dB)
14 kHz (-60dB)
FM8 kHz (-6dB)
19 kHz (-60dB)
RF preamplifiers
Wideband (0.1~30 MHz)
Tuned (160~40m / 12~10m bands)
RF attenuator
6 / 12 / 18dB
Blocking [2]
135 dB (100 KHz spaced signal, 14 MHz)
Synthesizer phase noise [2]
-128 dBm @ 10 kHz (14 MHz)
Image rejection
> 80dB (Main RX, 1.8~30 MHz)
> 50dB (Sub RX, 1.8~30 MHz)
IF rejection
> 80dB (Main RX, 1.8~30 MHz)
> 60dB (Sub RX, 1.8~30 MHz)
IF-shift range
±1.2 kHz
PBT (Passband Tuning)
Yes (shift/width, 10 or 20Hz steps)
Notch filter
Manual> 50dB / ±1.2 kHz
AutomaticYes
NB (Noise Blanker)
NB-A (narrow pulse, 15 levels adjustable)
NB-B (wide pulse, 15 levels adjustable)
DNR (Digital Noise Reduction)
Yes (4 settings)
RIT (Receiver Incremental Tuning)
±9.99 kHz
AGC (Automatic Gain Control)
Fast, slow, off
Frequency stability
± 0.5ppm max with temperature +25°C after 1' warm-up.
± 0.25ppm max with temperature +25°C after 1' warm-up [3].
IF (Intermediate Frequency, Main RX)
70.455 MHz
8.215 MHz
455 kHz
IF (Intermediate Frequency, Sub RX)
47.210 MHz
455 kHz
CW features
APF (60/120/240Hz BW EDSP)
Pitch (300~1050 Hz, 50 Hz steps)
Reverse sideband
Tuning scale
FSK features
APF (EDSP)
RTTY/Packet tuning scale
Transmitter
Output power
CW / SSB / FSK / FM5 ~ 100 W
SSB class-A5 ~ 25 W
AM5 ~ 25 W
Spurious emission
Harmonics<-60dBc
Carrier suppression (SSB)
>40dB
Unwanted sideband suppression (SSB)
>55dB
Intermodulation products (SSB)
-31dBc min (100W PEP)
-40dBc typ (25W PEP class-A)
Maximum deviation (FM)
± 2.5 kHz
Audio response
400~2600 Hz (-6dB, SSB)
Microphone
500~600Ω
XIT (Transmitter Incremental Tuning)
±9.99 kHz
CW features
Semi break-in
Full break-in
Keyer (Iambic 1&2, Bug)
ACS (Automatic Character Spacing)
FSK features
Packet 300bps (AFSK)
Packet 1200bps (FM)
Packet shift (200/1000 Hz)
Packet tone pair (4 settings)
RTTY shift (170/425/850 Hz, custom shift)
RTTY mark (2125/1275 Hz)
Antenna tuner
Impedance range16.6 ~ 150Ω
Features
Memory
99 regular memories, up to 5 groups
9 band-limit PMS memories
5 QMB memories
Display
10 / 100 or 1000 Hz frequency resolution (Main & Sub)
31-segments signal meter bar (Main & Sub)
31-segments tuning scale bar
Selective calling
CTCSS
Antenna
2 x SO239 50Ω
2 x RCA (RX in/out)
Power supply
13.8 VDC
100~120/200~240 VAC
Power consumption
2.3A RX (no signal, 13.8VDC)
2.7A RX (signal, 13.8VDC)
20A TX (100W output, 13.8VDC)
Audio power
2 W on 4Ω
Audio output
Jack 6.35 mm (headphone)
Jack 3.5 mm (headphone)
Connections
Jack 3.5 mm (4~8Ω external speaker)
Jack 3.5 mm (AF-OUT, Main RX and Sub RX)
Jack 3.5 mm (REMOTE)
2 x Jack 6.35 mm (KEY)
RCA (PTT)
RCA (PATCH)
RCA (TX-GND)
RCA (EXT-ALC)
RCA (TRV transverter)
RCA (+13.5VDC, 200mA)
4-pin DIN (RTTY)
5-pin DIN (PACKET)
7-pin DIN (DVS-2 digital recorder)
8-pin DIN (BAND-DATA)
8-pin jack (Microphone)
DB-9 (CAT)
Mechanical and environmental data
Operating temperature
from -10°C to +50°C
Dimensions
410 (W) x 135 (H) x 347 (D) mm
Weight
15 kg

  1. With preamplifier On, IDBT On, 2 kHz bandwidth in CW/SSB modes, 6 kHz bandwidth in AM mode.
  2. This parameter, not in official data, was obtained with direct tests.
  3. With optional TCXO-6 unit.
FT-1000 series :

The FT-1000 is the fruit of over 25.000 man-hours of intensive research and development by Yaesu's top design engineers. Instead of offering incremental improvements on existing designs the project involves a wholly new approach to the application of the digital and RF technologies to most demanding needs of the HF bands. The transceiver, first introduced in 1990, was upgraded with the FT-1000D model which have the following options included: BFP-1 (band pass filter module), TCXO-1 (high stability TCXO), and high-quality crystal filters in the 3rd IF. The FT-1000MP, year 1996, as the second generation of the series featuring a highly-effective Enhanced Digital Signal Processing (EDSP) technology for a new level of selectivity and noise reduction. The power output was reduced from 200 to 100 Watts, the weight was also reduced from 25 to 15kg. The FT-1000MP Mark V, introduced in 2000, building on the success of the FT-1000D/MP elite-class transceivers brings five new developments: 200 Watts PEP transmitter output, class-A PA operation, interlocked digital bandwidth tracking system, variable RF front-end filter, and enhanced ergonomics with multi-function Shuttle Jog dial. The FT-1000MP Mark V Field, year 2002, brings all this technology in a 100 Watts self-contained transceiver. A high-performance, all-in-one design. For those who want the very best at home, for field-day or on a DX-pedition, using AC or DC power sources.

FT-1000MP Mark V Field receiver configuration :


The Yaesu FT 1000 MP Mk V Field receiver configuration

FT-1000MP Mark V Field price

We have collected for your convenience the Yaesu FT1000MP-Mark-V-Field sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price Date Condition
USD 900.00 2018-may Second Hand

In very good condition and working all the way. Including 250Hz, 500Hz and 2000Hz 8-pole filters. Also included the Inrad roofing filter, SP-8 external Speaker, MH-31 hand mic

USD 1449.95 2011-jun Second Hand

With manual, new MH-31B8 hand mic, power cord, original box

FT-1000MP Mark V Field review

IZ8HNCDecember-31 2021

Older but always beautiful radio. Always wanted to have one and I finally managed to find it. Beautiful, a war machine.

[End post]


Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.

Newsletter RadioMasterList.com

Thank you

Good, old times:
Grundig, the flagship receiver
Satellit 3400
FM, LW, MW, 1.6-30 MHz

Recent YAESU direct-sampling transceiver
FT-710
HF/50/70 MHz, 102dB IMDR, 100 Watt

Aeronautical HF Frequency List 2023
New eBook
All the frequencies, all the Countries

USA Ham Repeaters
Pennsylvania
And Maryland, New York, Virginia ...

Most view radios
RadioMasterList.com

Most view radios
RadioMasterList.com

Top