Ultra-portable HF transceiver. General coverage receiver on 0.5-54 MHz, the transmitter covers 160 through 6 meters with power output adjustable on 0.5-5 Watts. Transmit and receive modes include SSB, CW, FM, AM, plus digital inputs. Built-in SWR bridge and Automatic Antenna Tuner (ATU). Ideated in P.R. of China, year of introduction 2018.
Reference market : amateur-radio
X5105 specifications
General |
Frequency coverage | |
---|---|
Receive [1] | 0.5000 ~ 54.0000 MHz |
Transmit | 1.8 / 3.5 / 5.2 / 7 / 10 / 14 / 18 / 21 / 24 / 28 / 50 MHz |
Mode | |
CW / LSB / USB / AM / FM | |
Tuning step | |
1 / 10 / 100 Hz / 1 / 10 / 100 kHz / 1 / 10 MHz |
Receiver |
Sensitivity [2] | |
---|---|
CW / SSB | 0.35 uV (1~1.8 MHz, 10dB S/N) 0.25 uV (1.8~30 MHz, 10dB S/N) 0.25 uV (50~54 MHz, 10dB S/N) |
AM | 10 uV (1~1.8 MHz, 10dB S/N) 2 uV (1.8~30 MHz, 10dB S/N) 2 uV (50~54 MHz, 10dB S/N) |
FM | 0.35 uV (28~30 MHz, 12dB SINAD) 0.35 uV (50~54 MHz, 12dB SINAD) |
Selectivity | |
CW | 0.5 KHz (-6dB) 2.0 KHz (-60dB) |
SSB | 2.4 KHz (-6dB) 4.6 KHz (-60dB) |
AM | 6.0 KHz (-6dB) 25.0 KHz (-60dB) |
FM | 12.0 KHz (-6dB) 25.0 KHz (-60dB) |
RF preamplifier | |
Yes | |
RF attenuator | |
Yes | |
Image rejection | |
70dB typ | |
IF rejection | |
60dB typ | |
NB (Noise Blanker) | |
Yes | |
DNR (Digital Noise Reduction) | |
Yes | |
RIT (Receiver Incremental Tuning) | |
Yes | |
AGC (Automatic Gain Control) | |
Slow, fast, off | |
Frequency stability | |
± 4 ppm max on first hour with temperature of 25°C ± 1 ppm max after first hour with temperature of 25°C |
|
IF (Intermediate Frequency) | |
1° | 70.455 MHz |
2° | 10.695 KHz |
3° | 455 KHz (FM) |
Transmitter |
Output power | |
---|---|
SSB / CW / FM | 0.5 ~ 5 W (0.5W increments) |
AM | 1.5 W |
Spurious emission | |
< -45 dB | |
Carrier suppression (SSB) | |
> 40 dB | |
Unwanted sideband suppression (SSB) | |
> 50 dB | |
Maximum deviation (FM) | |
±5 kHz | |
Microphone | |
600Ω nominal (200~10kΩ) | |
CW features | |
Keyer 3 message memory |
Features |
Memory | |
---|---|
100 regular memories 2 VFO |
|
Display | |
1 Hz frequency resolution Segment-bar signal meter |
|
Antenna | |
BNC 50Ω | |
Power supply | |
12VDC battery (3800 mA/h) 9~15 VDC external 13.8 VDC external nominal |
|
Power consumption | |
0.5A RX, typ 0.6A RX, max 2.5A TX, max power |
|
Audio power | |
600 mW on 8Ω | |
Audio output | |
Jack 3.5 mm external speaker | |
Connections | |
Jack 3.5 mm (CW keyer) Jack 3.5 mm (control voltages for external band switch) Jack 3.5 mm (CI/V remote control / firmware update) Socket 8-pin (microphone) Socket micro-DIN 8-pin (accessories) Socket (70.455 MHz IF output) |
Mechanical and environmental data |
Operating temperature | |
---|---|
from -10°C to +60°C | |
Dimensions | |
168 (W) x 48 (H) x 93 (D) mm, excluding protrusions | |
Weight | |
0.95kg |
- Receive range 500kHz to 30MHz and 50 to 54MHz with first firmware version.
- Preamplifier ON, Noise Blanker and Noise Reduction OFF.
The Xiegu X5105 is an ultra-portable multi-mode HF transceiver that delivers an wide range of operating features. It comes with a 3.6'' high-visibility LCD that displays a wide range of information covering virtually every aspect of the radio's operation. The transmitter covers 160 through 6 meters bands with power output adjustable from 0.5 to 5 Watts. Transmit and receive modes include USB/LSB, CW, FM, AM plus digital inputs. You also get a built-in SWR bridge plus a effective Automatic Antenna Tuner (ATU) that allow you to operate almost anywhere using a range of portable and fixed antenna systems. The X5105 receiver is general coverage, tuning from 0.5 MHz, the AM broadcast band, through 54 MHz. VFO tuning is velvet-smooth with 1-Hz resolution, and DX splits are easy using the VFO A/B mode and receive incremental tuning (RIT). More, built-in preamplifier/attenuator, pulse-type Noise Blanker (NB), adjustable Digital Noise Reduction (DNR), Notch Filter, variable AGC-Rate, and adjustable-width passband filters. For CW operators there is a Keyer complete with memory channels and CW-trainer. For voice modes, you get a built-in speech compression processor plus a multi-function key-pad microphone that places many of the radio's operating features right at your fingertips. Also, with its 3800mA/h on-board battery pack you get up to 6 to 8 hours of energy-independent portable operation between charges.
X5105 panel and microphone :
X5105 other features :
- Low-profile controls, heat sink, and desktop stand all built-in.
- Built-in DSP, noise blanker, and notch filter to suppress interference.
- 1° IF signal output for spectrum analyzer.
- Selectable IF bandwidth, 500Hz CW / 2.4kHz SSB / 6kHz AM.
- Rx scan-feature display band activity with 5 width settings available from 100 kHz to 500 kHz.
- Tx scan-feature display plots antenna SWR.
- Audio output with high-pass (adjustment range is 100 to 1000 Hz) and low-pass (adjustment range is 500 Hz to 3600 Hz) filter.
- Data Modem, this function allows you to copy PSK-31 signals (with CAR and AFC tracking) on the display without using an external modem or computer.
X5105 price
We have collected for your convenience the Xiegu X5105 sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
Price | Date | Condition |
USD 599.00 | 2021-oct | Brand-new |
USD 669.00 | 2019-may | Brand-new |
X5105 review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.