FLEX-6600 / 6600M
HF/50 MHz direct sampling transceiver, with or without 1920 x 1200 touch display and control console. Four independent receivers, syncronous diversity reception, RMDR 116 dB @ 2 KHz offset, enhanced 7th-order contest band preselectors, 100 Watts output power, built-in ATU. Ideated in USA, year of introduction 2018.
Reference market : amateur-radio
FLEX-6600 / 6600M specifications
General |
Frequency coverage | |
---|---|
Receive | 0.0300 ~ 54.0000 MHz |
Transmit [1] | 1.8 / 3.6 / 5.3 / 7.0 / 10 / 14 / 18 / 21 / 24 / 28 / 50 MHz |
Mode | |
CW / LSB / USB / FSK / AM / FM | |
Tuning step | |
1 Hz min |
Receiver |
ADC (Analog to Digital Conversion) | |
---|---|
Sample rate | 245.76 Msps |
Resolution | 16 Bit |
RF preamplifier | |
8 / 16 / 24 / 32 dB | |
RF attenuator | |
8 dB | |
RMDR (Reciprocal Mixing Dynamic Range) | |
110 dB (1 KHz spaced signals) 116 dB (2 KHz spaced signals) |
|
Spurious and image rejection | |
> 100 dB | |
Frequency stability | |
± 0.5ppm ± 0.005ppm/24h with GPS unit [2] |
Transmitter |
Output power [1] | |
---|---|
CW, RTTY, SSB, FM | ~1 to 100 W |
AM | ~1 to 25 W |
Spurious emission | |
Harmonics | < -55 dBc (1.8~29.7 MHz bands) < -65 dBc (50 MHz band) |
DAC (Digital to Analog Conversion) | |
Sample rate | 245.76 Msps |
Resolution | 16 Bit |
Carrier suppression (SSB) | |
< -80 dBc | |
Unwanted sideband suppression (SSB) | |
< -80 dBc | |
Maximum deviation (FM) | |
± 2.5 / 5 KHz | |
Audio response | |
100-2900 Hz default (variable 50Hz to 10kHz) | |
Microphone | |
600Ω nominal (200Ω to 10kΩ) | |
Antenna tuner | |
Impedance range | 16.7 to 150Ω (1.8 MHz band) 8.3 to 300Ω (3.6~29.7 MHz bands) 16.7 to 150Ω (50 MHz band) |
Minimum operating power | 10W (1.8~29.7 MHz bands) 2W (50 MHz band) |
Features |
Memory | |
---|---|
Unlimited memory channels | |
Display | |
1 Hz frequency resolution 8-inch 1920x1200 WUXGA touch sensitive LCD |
|
Antenna | |
2 x SO239 50Ω 2 x BNC 50Ω RX only |
|
Power supply | |
13.8VDC (± 15%) | |
Power consumption | |
2A, RX typ 23A, TX max power |
|
Audio power | |
21mW on 16-32Ω headphone 2.6Vpp@10kΩ for external speaker |
|
Audio output | |
Jack 3.5 mm headphone Jack 3.5 mm external speaker |
|
Connections | |
USB x 2 LAN (Ethernet 100/1000 BaseT) HDMI (external display) 25-pin Jack (accessories) Jack 3.5 mm (CW key) Jack 6.35 mm (balanced audio input) RCA (10 MHz reference input) RCA (PTT) RCA (TX Request) RCA (ALC) RCA (Remote On) RCA (TX1) RCA (TX2) RCA (TX3) BNC x 2 (XVTR transverters) SMA (GPS antenna input) SMA (10 MHz GPSDO reference output) |
Mechanical and environmental data |
Operating temperature | |
---|---|
from 0°C to +50°C | |
Dimensions | |
355 (W) x 178 (H) x 305 (D) mm | |
Weight | |
5.0kg |
- The radio are also capable of very low power (0 dBm typ, +10 dBm max) transmit on transverter port output from 100 KHz to 54 MHz.
- The GPSDO option (GPS locked) unit is request.
The FLEX-6600 (PC controlled box) and the FLEX-6600M (stand-alone rig) offers the latest direct sampling SDR technology for the advanced HF and 50MHz amateur operator. The FLEX6600M integrates all "6600" capabilities with a stunning 8-inch high resolution touch display and ergonomic controls to deliver a very high performance software defined radio with a traditional radio interface. The transceiver, with the same FLEX-6400 / M base features, add a set of contest-grade filters (7th order preselector), ultra low spurious emissions, and the ability to operate full duplex cross band on two antennas let you transmit on one band while receiving on another, no external equipment required. Even switch to synchronous diversity reception when needed to help you pick out the weak ones in the midst of QRM.
FLEX-6600 / 6600M features :
- Dual VFO front panel control sets (only FLEX-6600M)
- External HDMI compatible display support (only FLEX-6600M)
- Internal 2W front speaker (only FLEX-6600M)
- 4 indipendent receivers / panadapters / waterfalls
- 2 receive only ports
- 2 XVTR transverter ports
- 155dB spectrum dinamic range at max zoom
- Full duplex RX/TX operation
- Full break-in QSK
- Integrated remote operation
- VLF (630 and 2200m) IF coverage
- D-STAR with optional ThumbDV
- GPS disciplined oscillator option
- External 10MHz reference input
- Integrated automatic antenna tuner
- Continuos MARS/CAP TX coverage option
- Simultaneous receive on two antennas
- Syncronous diversity reception
- Enhanced panadapter zoom with 1.6Hz RBW
FLEX-6600 (left) and FLEX-6600M (right) front panel
FLEX-6600 and FLEX-6600M back panel
- External 13.8 VDC power connector
- Antenna 1
- Antenna 2
- Powered speakers socket
- Morse key socket
- Balanced audio input
- Accessory socket
- Push-To-Talk socket
- TX Request socket
- ALC socket
- Remote On socket
- GPS antenna socket (Optional)
- GPS Disciplined Oscillator 10 MHz output (Optional)
- 100/1000BaseT Ethernet port
- USB accessory socket
- USB accessory socket
- HDMI external display socket
- 10 MHz input
- TX3 socket
- TX2 socket
- TX1 socket
- RXB antenna socket
- XVTR-B output socket
- Microphone input socket
- XVTR-A output socket
- RXA antenna socket
- Headphones socket
- Ground terminal
FLEX-6600 / 6600M price
We have collected for your convenience the FlexRadio FLEX-6600 / FLEX-6600M sale price (US Dollar) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
Price | Date | Condition |
USD 3999.00 | 2020-mar |
Brand-new FLEX-6600 version |
USD 4999.00 | 2020-mar |
Brand-new FLEX-6600M version, with control console |
FLEX-6600 / 6600M review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.