All solid state CW, SSB and AM receiver designed to cover 500 KHz to 29.9 MHz in five bands with proper preselector. Triple conversion super heterodyne circuit with Wadley-loop oscillator for frequency stabilization. The dial mechanism provides 10 KHz frequency readout. Good sensitivity, three step RF attenuator, audio filter, DC and AC power supply. Ideated in Japan, year of introduction 1976.
Reference market : amateur-radio
FRG-7 specifications
General |
Frequency coverage | |
---|---|
0.5000 ~ 29.9000 MHz | |
Mode | |
CW / LSB / USB / AM |
Receiver |
Sensitivity | |
---|---|
CW / SSB | <0.7 uV (10dB S/N) |
AM | <2 uV (10dB S/N) |
Selectivity | |
6 KHz (-6 dB)
14 KHz (-50 dB) |
|
RF attenuator | |
Yes | |
ANL (Automatic Noise Limiter) | |
Yes (AM) | |
Frequency stability | |
±500 Hz at any 30' after warm-up | |
IF (Intermediate Frequency) | |
1° | 54.5 ~ 55.5 MHz |
2° | 2 ~ 3 MHz |
3° | 455 kHz |
Audio response | |
250~3000 Hz (normal).
400~2500 Hz (narrow). 250~1500 Hz (low). |
Features |
Antenna | |
---|---|
SO239 50Ω (1.6~29.9 MHz)
High-Z (0.5~1.6 MHz) |
|
Power supply | |
100 / 110 / 117 / 200 / 220 / 237 VAC.
12 VDC external. 12 VDC internal (8 batteries). |
|
Power consumption | |
14 VA (with AC power supply) | |
Audio power | |
2 W on 4Ω | |
Audio output | |
Jack 6.35 mm (headphone) | |
Connections | |
Jack 3.5 mm (REC)
Jack 3.5 mm (external speaker) Terminal block (mute) |
Mechanical and environmental data |
Dimensions | |
---|---|
340 (W) x 153 (H) x 285 (D) mm | |
Weight | |
~7kg without batteries |
FRG-7 rear panel and connections :
Yaesu FRG-7 rear panel and connections
Reference / Description | |
---|---|
1 | EXT SP This jack is for connection of a 4Ω external speaker. |
2 | EXT DC Receptacle for external 12 Volt DC supply |
3 | FUSE Fuse for AC operation, use 0.15 Ampere rating fuse |
4 | AC cord |
5 | SW2 Coaxial connector for short wave band |
6 | SW / BC / E / MUTE SW is long wire antenna terminal for the short wave band. BC is long wire antenna terminal for the medium wave broadcast band. E is ground connection. MUTE is uded to disable the receiver while transmitting, connect this terminal to ground for receiver muting |
7 | AC cord holder |
8 | Internal battery pack |
FRG-7 price
We have collected for your convenience the Yaesu FRG7 sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
Price | Date | Condition |
EUR 200.00 | 2021-jul |
Second Hand In relatively good condition |
EUR 231.00 (199GBP) |
2021-jul |
Second Hand Good condition considering the age. Rare model as it doesn't have the Fine Tune like most of the later ones |
EUR 149.00 (169USD) |
2019-oct |
Second Hand Fair condition |
EUR 165.00 (189USD) |
2017-jul |
Second Hand The cabinet is in fairly good shape, but has been repainted. This version includes the Fine Tuning knob. The light switch now engages an internal 100 kHz calibrator |
FRG-7 review
NorthernDean | 18 December 2023 |
I got this receiver in the late 90s, it works very well. It's very sensitive and selective. I would recommend it as a good solid entry level receiver.
[End post]
SWL de morlaix 29600 | 20 November 2023 |
Very good AM receiver for listening to short waves, good sensitivity.
[End post]
Bernmeister | 25 September 2023 |
I am surprised there are no additional reviews. The FRG-7 is a user friendly radio once you get used to it. My only gripe was the excessive BFO drift. I cant remember what technique I used but I determined that all of the frequency drift I experienced on SSB and CW was from the BFO.
[End post]
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.