Specifications Prices
FM / SW / MW / LW / VHF-Air multi band Radio with SSB (Single Sideband) capability. Dual conversions circuit with DSP (Digital Signal Processing), IF Bandwidth control, Squelch, Advanced Battery Charger with Faulty Detection feature, 1674 Memories with editable Station Display up to 10 characters, Tone control. 5 Tuning methods: direct frequency tuning, auto scanning, manual tuning, memory recall, rotary control. 42 Time Zones with DST setting and 2 editable City Names. 3 alarms by radio or HWS (Humane Wake System) buzzer. Ideated in Taiwan, year of introduction 2021.
Reference market : consumer / amateur-radio
ATS-909X2 specifications
| General |
| Frequency coverage | |
|---|---|
| 0.1000 ~ 29.9999 MHz
64.0000 ~ 108.0000 MHz 118.0000 ~ 137.0000 MHz |
|
| Mode | |
| SSB / AM / WFM | |
| Tuning step | |
| 10 / 20 Hz / 1 KHz (SSB)
1 / 5 / 9 / 10 KHz (AM) 50 / 100 / 200 KHz (WFM) |
| Receiver |
| Selectivity | |
|---|---|
| SSB | 1 / 1.8 / 2.5 / 3 / 4 KHz |
| AM | 1.8 / 2.5 / 3 / 4 / 6 KHz (LW, MW, SW)
2 / 4 / 6 KHz (VHF Air band) |
| WFM | 65 / 85 / 110 KHz |
| RF attenuator | |
| Adjustable RF-gain [1] | |
| Features |
| Memory | |
|---|---|
| 1674 total memories
(9 x 3 banks for LW) (27 x 3 banks for MW) (441 x 3 banks for SW) (36 x 3 banks for FM) (45 x 3 banks for VHF-Air) |
|
| Display | |
| 100 Hz frequency resolution
12-segments signal meter bar Signal strength or SNR in dB |
|
| Antenna | |
| Jack 3.5mm (50Ω@10 MHz, 0.1~30MHz) | |
| Power supply | |
| 4.8 ~ 6V (4 x UM3/AA, alkaline / NiMH / NiCad).
9 VDC external (center pin positive) [2] |
|
| Audio power [3] | |
| 600 mW on 8Ω (by battery, at 6V)
1.3 W on 8Ω (by DC-IN at 9V) |
|
| Connections | |
| Jack 3.5 mm (stereo headphone)
Jack 3.5 mm (LINE OUT, 150mVrms @ 1kΩ) Jack 3.5 mm (AUX IN) Jack 2.5 mm (STANDBY, recorder activation) Plug (power supply, 2mm diameter of center tip pin) |
| Mechanical and environmental data |
| Operating temperature | |
|---|---|
| from -10°C to +45°C | |
| Dimensions | |
| 207 (W) x 134.5 (H) x 41 (D) mm | |
| Weight | |
| 728g without batteries |
- On 0.1~30 MHz band.
- AC power adapter in the box.
- Speaker: 3 Watts, 7.6cm.
Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME
The receiver renew Sangean's popular serie ATS-909 / ATS-909X radio. Now with the new and improved 2nd generation ATS-909X2, the producer have made some significant improvements over the functionality while refining the already-good features on the original model. Another worthy upgrade is the newly designed smart battery compartment. The radio will now be able to detect faulty batteries and locate its position in the battery compartment when plugged in for charging under standby mode. Other new features: Air Band mode (118~137MHz). FM mode with Soft mute and RDS / RBDS decoder for PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Correct Time) codes. Manual and Automatic Bandwidth (selectivity) control. 10Hz Fine Tuning step for SSB. Larger LCD screen with dimmer LED backlight and fade IN/OUT. 1674 station Presets with 3 individual Memory Banks. Squelch function for adjusting the receiving Threshold to eliminate weak transmissions and noise. Multi-functional Menu. Information indications for SNR / RSSI.
ATS-909X2 video :
Introduction video to the Sangean ATS-909X2 receiver:
Features, Faulty batteries detector, Soft mute, Auto/Manual bandwidth, Squelch.
ATS-909X2 in comparison with Satellit 750 / S-2000 :
| Brand | Sangean | Grundig / Eton | Tecsun |
| Air-band | ✔ | ✔ | ✔ |
| Rotable MW antenna | ✔ | ✔ | |
| RDS / RBDS decoder | ✔ | ||
| DSP filters | ✔ | ||
| IF output | ✔ | ||
| Memories | 1674 | 1000 | 1000 |
| Dimensions | 207 x 134 x 41mm | 372 x 184 x 146mm | 372 x 183 x 153mm |
| Weight (without batteries) | 728g | 2.7kg | 2.7kg |
It should be noted that the Tecsun S-2000 receiver is the version for the Asia market, with few variations, of the Satellit-750 from Grundig / Eton. This last intended for Europe and North America users.
ATS-909X2 bandwidth control :
The Bandwidth Control switch allows you to choose whether the bandwidth for the various bands should be automatically set or manually set. When the switch is placed in the manual position, the Bandwidth Control button can be used to change the bandwidth on the SW, MW, LW, FM and AIR bands. A wide bandwidth can increase sound quality when receiving a strong signal, while a narrow bandwidth can make it easier to receive weak signals and overcome problems caused by interference. There are three different bandwidth settings available for the AIR and FM bands, while the SW, MW and LW bands each have five different bandwidth settings. See table.
| Bandwidth | ||||
|---|---|---|---|---|
| Widest | 110kHz | 6kHz | 4kHz | 6kHz |
| Wide | -- | 4kHz | 3kHz | -- |
| Norm | 85kHz | 3kHz | 2.5kHz | 4kHz |
| Narrow | -- | 2.5kHz | 1.8kHz | -- |
| Narrowest | 65kHz | 1.8kHz | 1kHz | 2kHz |
To use automatic bandwidth control, place the Bandwidth Control simply switch in the "Auto" position. The bandwidth will now automatically be adjusted to the best setting according to the signal to noise ratio and the radio will keep monitoring the signal to noise ratio every 300 milliseconds and adjust the bandwidth if needed.
ATS-909X2 RDS / RBDS feature :
Radio Data System (RDS) is a service that allows FM stations to broadcast additional information. The Sangean ATS-909X2 is capable of receiving RDS / RBDS signals. When receiving an FM radio station that broadcasts RDS data, the station name will be displayed in the Text display. If the RDS CT indicator is shown on the display, this means that the radio's clock has been automatically synchronized with the clock signal broadcasted by the FM radio station. This feature must be enabled (it is disabled by default) for the radio to be able to synchronize its clock using the signal. The RDS CT feature is a convenient feature that enables you to always have the correct time set when tuning in to an FM station that broadcasts an RDS CT signal.
When tuned to an FM station with RDS, additional information that is being broadcasted can be shown in the Text display by repeatedly pressing the Info button. The radio will show the following information in sequence: Preset name / Program service name / Program Type / Radio Text.
ATS-909X2 for charge batteries :
The ATS909X2 can be used to charge rechargeable Ni-Mh or Ni-Cad batteries when the radio is powered off. Before charging batteries using the ATS-909X2, please first make sure that the batteries that are being used are rechargeable NI-MH or NI-CAD batteries. The Charge indicator will blink in red when the batteries are being charged. When the batteries are fully charged, the Text display will show the message "Batt Full". Note, if any abnormalities are detected while charging batteries, the Text display will show the message "BT-X-CHECK". Where "X" represents the number of the battery that needs to be checked and / or replaced. Example, "BT-2-CHECK" means that battery 2 needs to be checked and / or replaced. Which battery corresponds to which battery number is shown both on the battery compartment cover and inside the battery compartment.
ATS-909X2 panels and connections :
Sangean ATS-909X2 top and front panels
Sangean ATS-909X2 rear panel
| Reference / Description | |
|---|---|
| 1 | Time Set button |
| 2 | Daylight Saving Time button. Enable - disable Daylight Saving Time |
| 3 | Select home time or world time |
| 4 | Speaker |
| 5 | Timer buttons. Set alarm timers (1, 2, 3) / View alarm timer settings |
| 6 | Single Side Band (SSB) / Alarm mode button. Switch between the single side bands LSB-USB / Configure the alarm mode when setting alarm timers |
| 7 | LCD display |
| 8 | Squelch button. Set squelch level |
| 9 | Charge indicator |
| 10 | Power / Sleep timer button |
| 11 | Backlight button. Set backlight brightness level / Turn on backlight when turned off |
| 12 | Volume Control |
| 13 | Bandwidth Control switch. Select auto or manual mode for bandwidth control |
| 14 | Tone Control switch. Select tone (music, normal, news) |
| 15 | Lock switch |
| 16 | Rotary Tuning knob. Highlight items in menus / Adjust frequency / Select page on the SW band |
| 17 | Step button. Select tuning step / Disable tuning using the Rotary Tuning knob / Confirm menu selection |
| 18 | Tuning Up - Down buttons. Tune up - down / Scan for radio station with higher - lower frequency / Select page on SW band / Select Home - World city / Go to next - previous character when editing text |
| 19 | Numeric buttons. Input digits 0-9 / Select preset stations / Select SW meter bands |
| 20 | ATS / METER / SW button |
| 21 | ATS / MW / LW button |
| 22 | ATS / FM button |
| 23 | AIR button. Select AIR band / Perform page scan on AIR band |
| 24 | Memo button. Store radio stations as preset station / Store radio station for alarm timer / Select SW 25 meter band |
| 25 | Freq button. Direct tune to a frequency / Select SW 60 meter band |
| 26 | Bandwidth - Memory Lock button. Select bandwidth / Lock preset stations |
| 27 | Page button. Change the preset page on MW, FM, AIR band / Enable page selection on SW band |
| 28 | Edit button |
| 29 | Info - Menu button. Display information about signal / Display RDS information / Open - close the menu |
| 30 | Enter button |
| 31 | Cancel button. Erase user input / Delete preset station / Select SW 11 meter band / Disable the alarm function |
| 32 | Decimal point button. Input decimal point / Select AM - PM when the 12-hour clock format is selected / Select SW 15 meter band |
| 33 | Telescopic antenna for FM / AIR / SW band |
| 34 | Folding stand. Can be used as a stand for the radio |
| 35 | AUX IN jack. Audio input from external device |
| 36 | AM EXT ANT jack. External AM antenna for LW / MW / SW band |
| 37 | REC STANDBY jack. For timer activation of external recorder synchronously controlled by alarm |
| 38 | LINE OUT jack. Stereo audio output to external device |
| 39 | AUX IN button. Enable - disable AUX IN mode |
| 40 | AM RF gain jog dial |
| 41 | DC in socket. For 9V 1.2A power DC adapter, center pin positive |
| 42 | Headphones jack |
| 43 | Battery Compartment |
| 44 | Data IN A terminal. This terminal is used for configuring the device in the factory and is not intended to be used by end-users! |
| 45 | Data IN B terminal. This terminal is used for configuring the device in the factory and is not intended to be used by end-users! |
| 46 | Reset button |
| 47 | Battery switch. Select the type of batteries that are used in the radio, Alkaline or NiMH - NiCad |
| 48 | MW - AM Tuning Step switch. Select tuning step for MW (9kHz for Europe, 10kHz for America) |
ATS-909X2 photo gallery :
ATS-909X2 price
We have collected for your convenience the Sangean ATS909X2 sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
 Price |
 Date |
 Condition |
| EUR 299.00 | 2023-mar | Brand-new |
|
EUR 250.00 (214GBP) |
2022-jan | Brand-new |
| EUR 282.99 | 2022-jan | Brand-new |
|
EUR 290.00 (301USD) |
2022-jan | Brand-new |
ATS-909X2 review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.
Grundig, the flagship receiver
FM, LW, MW, 1.6-30 MHz
HF/50/70 MHz, 102dB IMDR, 100 Watt
All the frequencies, all the Countries
Copyright. All rights reserved.
 | This site agree to login-free initiative |