Specifications Prices
HF transceiver for desktop and mobile QRP operations with a minimum number of user interface controls. Dual conversion, low–IF, receiver with 32-bit DSP. Power output 1/5/10 Watts, LDMOS push-pull, automatic antenna tuner, replaceable internal lithium‐ion batteries. Year of introduction 2018.
Reference market : amateur-radio
CTX‐10 specifications
| General |
| Frequency coverage | |
|---|---|
| Receive | 0.1500 ~ 30.0000 MHz [5] |
| Transmit | 3.5 / 5.3 / 7 / 10 / 14 / 18 / 21 / 24 / 28 MHz band |
| Mode | |
| CW / LSB / USB / AM [1] | |
| Tuning step | |
| 10 / 100 Hz / 1 / 5 [2] / 10 / 100 KHz / 1 MHz | |
| Receiver |
| Sensitivity | |
|---|---|
| SSB | -110 dBm (1.8~30 MHz, 10dB S/N) |
| MDS (Minimum Detectable Signal) [3] | |
| -115 dBm (0.15~1.8 MHz) -135 dBm (1.8~30 MHz) |
|
| Selectivity | |
| CW | 0.5 / 1/ 1.8 / 2.2 / 2.6 kHz |
| SSB | 1.8 / 2.2 / 2.6 kHz |
| AM | 5 / 7.5 / 15 kHz |
| ADC (Analog to Digital Conversion) | |
| Resolution | 14 Bit |
| RF preamplifier | |
| ~8 dB | |
| AGC (Automatic Gain Control) | |
| OFF, Slow, Medium, Fast | |
| Frequency stability | |
| ± 0.2ppm [4] | |
| CW features | |
| Morse code reader | |
| Transmitter |
| Output power | |
|---|---|
| CW / SSB | 1 / 5 / 10W |
| Spurious emission | |
| Harmonics | > -50dBc |
| Carrier suppression (SSB) | |
| > 55dB | |
| Unwanted sideband suppression (SSB) | |
| > 55dB | |
| CW features | |
| 5~50 WPM keyer | |
| Features |
| Memory | |
|---|---|
| 8 channels in 8 groups | |
| Display | |
| 64 x 128 pixel, 3.8cm OLED 10 Hz frequency resolution |
|
| Antenna | |
| BNC 50Ω | |
| Power supply | |
| 12~18VDC typ 5~20VDC min/max |
|
| Power consumption | |
| 2.5W RX typ 20W RX max |
|
| Audio power | |
| 800mW on 8Ω 40mW on 16Ω (headphone) |
|
| Audio output | |
| Jack 3.5mm (headphone) Jack 3.5mm (external speaker) |
|
| Connections | |
| mini-USB 2.0 (I/Q data, remote control) Jack 3.5mm (CW key) 8-pin RJ‐45 (microphone) 6-pin mini‐DIN (accessory) |
| Mechanical and environmental data |
| Operating temperature | |
|---|---|
| from 0°C to +45°C | |
| Dimensions | |
| 142 (W) x 39 (H) x 152 (D) mm, not including knobs and feets | |
| Weight | |
| 0.99kg |
- Only for receiver.
- AM mode.
- With 500Hz bandwidth.
- TCXO built-in.
- Performance is not guaranteed on 150-540 KHz range.
Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME
The CommRadio CTX‐10 was designed to be rugged and user‐friendly, with a minimum number of user interface interactions to produce the desired system functional change. Built-in replaceable 3 x 18650 Lithium‐Ion batteries (4.2V @ 2.6Ah) provide power for a day's casual operation. The ability to provide operational power and simultaneously recharge the batteries from any min-5VDC to max-20VDC source provides low‐cost portable expansion capability and unlimited field operation. Features as wide‐range Automatic Antenna Tuner (ATU), CW keyer and CW reader provide everything amateur-radio operator need for full functionality in one lightweight, die‐cast aluminum package with no need for supplementary cooling solutions during high duty cycle operations.
Introduction video to the CommRadio CTX‐10 transceiver:
Optical tuning encoder, Mode changes, Save to memory, TX-RX turn-around time.
CTX‐10 features in short :
9 ham-bands.
80 / 60 / 40 / 30 / 20 / 17 / 15 / 12 / 10 meters, with 5 switched LPF (low pass filters).Audio input/output.
To interface with sound-card, for data-modes.Microphone input.
Built in compression and noise gate. Microphone not supplied.ATU.
Relay controlled with 6-switched series inductors and 8-switched shunt capacitors, with memory.7 receiver pre-selector filters.
150-540 / 540-1710 kHz / 1.7-4 / 4-7.5 / 7.5-14.5 / 14.5-21 / 21-30 MHz.ESD protection.
On antenna, DC power, USB ports.
25WPM CW internal-battery endurance of the CommRadio CTX‐10 transceiver.
CTX‐10 functional block diagram :
CommRadio CTX10 architecture
| Block / Description | |
|---|---|
| 1 | T/R switch, TX low-pass filter and ATU |
| 2 | 1/2 RF power amplifier |
| 3 | 1/2 RF power amplifier |
| 4 | RF driver amplifier |
| 5 | TX active mixer |
| 6 | DDS synthesizer |
| 7 | TX direct quadrature modulator |
| 8 | PLL clock generator |
| 9 | TX audio CODEC |
| 10 | TX microphone preamplifier and compressor |
| 11 | RX RF tuner |
| 12 | RX dual ADC |
| 13 | RX DSP processor |
| 14 | Microcontroller |
| 15 | USB in/out port |
| 16 | RX audio CODEC and speaker driver |
| 17 | RX band-pass filter |
CTX‐10 price
We have collected for your convenience the CommRadio CTX10 sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
 Price |
 Date |
 Condition |
|
EUR 664.00 (699USD) |
2023-mar |
Refurbished Refurbed at factory with new encoder and ROM update |
|
EUR 849.00 (999USD) |
2021-may | Brand-new |
CTX‐10 review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.
Grundig, the flagship receiver
FM, LW, MW, 1.6-30 MHz
HF/50/70 MHz, 102dB IMDR, 100 Watt
All the frequencies, all the Countries
Copyright. All rights reserved.
 | This site agree to login-free initiative |