|
|
UV-50X3
Specifications Prices
Mobile 50 Watt tri-band radio with two receivers and cross-band repeater. Wide receive coverage, beyond the transmitting frequencies. Separate front LCD panel. Ideated in P.R. of China.
Reference market : amateur-radio
UV-50X3 specifications
| General |
| Frequency coverage | |
|---|---|
| Receive | 0.5000 ~ 1.7100 MHz 76.0000 ~ 108.0000 MHz 108.0000 ~ 135.9950 MHz 136.0000 ~ 173.9950 MHz 174.0000 ~ 250.0000 MHz 300.0000 ~ 399.9950 MHz 400.0000 ~ 479.9950 MHz 480.0000 ~ 520.0000 MHz |
| Transmit | 136.0000 ~ 173.9950 MHz 222.0000 ~ 225.0000 MHz 400.0000 ~ 479.9950 MHz |
| Mode | |
| AM / FM / WFM | |
| Tuning step | |
| 2.5 / 5 / 6.25 / 8.333 / 9 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 / 200 KHz 1 MHz |
|
| Receiver |
| Sensitivity | |
|---|---|
| AM | 5.0 uV (0.5~1.71 MHz, 10dB S/N) 0.8 uV (108~136 MHz, 10dB S/N) 0.8 uV (300~336 MHz, 10dB S/N) |
| FM | 0.2 uV (136~174 MHz, 12dB SINAD) 0.25 uV (336~400 MHz, 12dB SINAD) 0.2 uV (400~480 MHz, 12dB SINAD) |
| WFM | 2.0 uV (76~108 MHz, 12dB SINAD) 0.5 uV (480~520 MHz, 12dB SINAD) |
| Selectivity | |
| AM/FM (N) | 6 KHz (-6dB) 20 KHz (-60dB) |
| AM/FM (W) | 10 KHz (-6dB) 30 KHz (-60dB) |
| Frequency stability | |
| ± 2.5 ppm from -10°C to +60°C | |
| IF (Intermediate Frequency) | |
| 1° | 49.95 MHz (band A) 45.45 MHz (band B) |
| 2° | 450.0 KHz |
| Squelch sensitivity | |
| 0.13 uV (144, 430 MHz) | |
| Transmitter |
| Output power | |
|---|---|
| VHF | 50 / 20 / 5W |
| UHF | 50 / 20 / 5W |
| Spurious emission | |
| Adjacent channels | < -60 dB |
| Harmonics | < -60 dB |
| Maximum deviation (FM) | |
| ± 5.0 KHz (wide) ± 2.5 KHz (narrow) |
|
| Microphone | |
| 2kΩ | |
| Features |
| Memory | |
|---|---|
| 1000 regular memories (500 x 2 banks) | |
| Display | |
| 1 KHz frequency resolution Dual segment-bar signal meter |
|
| Selective calling | |
| CTCSS / DCS / DTMF 1750Hz tone |
|
| Antenna | |
| SO-239 50Ω | |
| Power supply | |
| 13.8V nominal (11.7-15.8V) | |
| Power consumption | |
| 0.5A RX, typ 10A TX, max power on 144 MHz 12A TX, max power on 430 MHz |
|
| Audio power | |
| 4 W on 4Ω speaker 8 W on 4Ω BTL speakers |
|
| Connections | |
| DIN 8-pin (RS232C, packet) Jack (external speakers) Jack (external audio input) |
| Mechanical and environmental data |
| Operating temperature | |
|---|---|
| from -20°C to +60°C | |
| Dimensions | |
| LCD panel | 157 (W) x 66 (H) x 33 (D) mm projections not included |
| Chassis | 140 (W) x 46 (H) x 150 (D) mm projections not included |
| Weight | |
| LCD panel | 0.22kg |
| Chassis | 2.1kg |
The UV-50X3 is a tri-band radio with two receivers capabilities, which enables simultaneous RX/TX within VHF / 222 MHz / UHF bands (full duplex), as well as dual VHF/VHF and UHF/UHF receiver capabilities. It can also act as a full cross-band repeater allowing the user to connect or extend the range of repeaters, handhelds, and mobiles. The cross band repeater works in between VHF and UHF frequencies. Moreover the UV50X3 includes a wide receive coverage (ex. AM medium waves and VHF AIR-band) beyond the transmitting frequencies. Other UV 50X3 features:
- Independent VFO, audio levels, and squelch
The transceiver includes separate volume adjustments for the independent VFOs. The UV50X3 has dual speakers in the LCD panel, allowing stereo audio when one station is being received but separate monaural speakers when both VFOs are active, which are controlled by the separate volume knobs. A third speaker is located on the radio body (chassis) which can be set as the only speaker, simultaneously be used with the panel speakers, or can be unused as well. The radio has both line-input and line-output jacks for your own speaker system. Also allows you to listen to a line-input source while still monitoring. The squelch is adjustable on each side of the display.
- Memory channels
The UV-50X3 has 1000 memory channels in two separate memory banks, the right VFO has 500 channels and the left VFO has 500 channels. You can program both active, transmit/receive channels, and passive, receive only, channels into the same memory bank.
- Separate LCD Panel and microphone
The UV50X3 has a front panel that is separated from the main radio body. The panel is connected with standard Ethernet cable (included) allowing the radio body to be remotely (or trunk) mounted. The front panel includes several mounting accessories including a suction cup mount. You can set the LCD Panel to 8 different colors. The front panel has a built-in microphone which allows you to either use the included DTMF microphone or the panel microphone. The separate DTMF microphone can also be plugged directly into the chassis.
- Programmable and customizable
The radio can be completely programmed without a computer, including channel alpha-numeric names. The transceiver is fully supported through the free ''Chirp'' programming software, compatible on Windows, Linux and OSX (macOS).
- Group tones supported
The UV-50X3 supports CTCSS, DCS, and DTMF calling methods.
- RF power
High / mid or low RF power switchable from 5 up to 50 Watt.
Baofeng UV-50X3 front LCD panel
UV-50X3 price
We have collected for your convenience the Baofeng UV50X3 sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
 Price |
 Date |
 Condition |
|
EUR 285.95 (339USD) |
2021-oct | Brand-new |
|
EUR 290.00 (339USD) |
2018-oct | Brand-new |
UV-50X3 review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.
Grundig, the flagship receiver
FM, LW, MW, 1.6-30 MHz
HF/50/70 MHz, 102dB IMDR, 100 Watt
All the frequencies, all the Countries
Copyright. All rights reserved.
 | This site agree to login-free initiative |