500 KHz to 6 GHz super wide-band coverage tuner. RF front-end for professional signal analysis with 20 MHz wide IF bandwidth. Ideated in Japan, year of introduction 2013.
Reference market : professional
RF-6G specifications
General |
Frequency coverage | |
---|---|
0.5000 ~ 6000.0000 MHz | |
Tuning step | |
1 Hz |
Receiver |
IF output frequency | |
---|---|
45.05 MHz | |
IF output bandwidth | |
20 MHz [1] | |
Gain RF to IF | |
30 dB | |
Gain flatness | |
± 2 dB | |
RF preamplifier | |
~12 dB (300 MHz) | |
RF attenuator | |
0 / 10 / 20 dB (< 1000 MHz) | |
NF (Noise Figure) | |
11 dB typ (< 1000 MHz) | |
IP3 (3rd order intercept point) | |
+3 dBm min (< 3000 MHz) | |
RF maximum input level | |
+15 dBm | |
Frequency stability | |
± 0.1ppm after 5' warm-up | |
Synthesizer settling time | |
< 3 ms |
Features |
Antenna | |
---|---|
2 x SMA 50Ω | |
IF output | |
SMA 50Ω | |
Power supply | |
10.7 ~ 16 VDC external | |
Power consumption | |
1200 mA typ | |
Connections | |
DB-9 (power supply and PH5 control interface)
IDC-10P (SPI control interface) |
Mechanical and environmental data |
Operating temperature | |
---|---|
from -10°C to +50°C | |
Dimensions | |
100 (W) x 40 (H) x 250 (D) mm | |
Weight | |
720g |
- Full 20 MHz bandwidth available for receive center frequency of at least 10.5 MHz.
Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME
The RF-6G is a wide-band RF front-end with fast switching synthesizer and low gain flatness over 500 KHz to 6 GHz coverage. Moreover excellent phase noise performance and high-linearity IF output with 20 MHz bandwidth. Two interfaces, the high-speed SPI for 10 Mbps and the asynchronous PH5 control at 115 kbps. On all bands RF6G provides very good tuning characteristics needed for professional signal analysis. Typical applications for the tuner is the integration into high-end monitoring systems, for interference detection and investigation, in field-strength measurements, radio propagation research, close-range detection of illegal eavesdropping devices. This AOR provides high accuracy on 45.05 MHz IF output for external peripherals, factory calibration ensures that the output is correlated to the antenna RF input within only few dB and this on the entire receive range:
The RF 6G has two RF antenna connectors, selectable, and a low noise down converter. A direct digital synthesizer is employed for the 1° local oscillator to ensure fast frequency switching of less than 3 mS. An input filters bank pre-select the RF spectrum:
Filter / Bandwidth | |
---|---|
LPF 1 | 1.6 MHz |
LPF/HPF 2 | 1.6~35 MHz |
BPF 3 | 20~60 MHz |
BPF 4 | 60~105 MHz |
BPF 5 | 105~140 MHz |
BPF 6 | 140~220 MHz |
BPF 7 | 200~350 MHz |
BPF 8 | 350~600 MHz |
BPF 9 | 600~1000 MHz |
BPF 10 | 1000~1500 MHz |
BPF 11 | 1500~2000 MHz |
BPF 12 | 2000~2500 MHz |
BPF 13 | 2500~3000 MHz |
BPF 14 | 3000~4000 MHz |
BPF 15 | 4000~5000 MHz |
BPF 16 | 5000~6000 MHz |
RF-6G front panel connections :
RF-6G price
We have collected for your convenience the Aor RF6G sale price (Euro) and its trend over time. Useful to guarantee a cheaper purchase of this device and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
Price | Date | Condition |
EUR 4999.00 (5899USD) |
2018-oct | Brand-new |
RF-6G review
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.