WJ-8711A
High performance, triple-conversion, HF desktop receiver with last IF in digital technology. Frequency range 0.005-30 MHz all-mode. 66 IF bandwidths between 0.056~16 KHz. Ideated in USA.
Reference market : commercial / professional
WJ-8711A specifications
General |
Frequency coverage | |
---|---|
0.0050 ~ 30.0000 MHz | |
Mode | |
CW / LSB / USB / ISB / AM / FM | |
Tuning step | |
1 Hz min |
Receiver |
Sensitivity | |
---|---|
CW [1] | 28 uV (0.005~0.02 MHz, pre. OFF, 16dB S+N/N)
1.27 uV (0.02~0.05 MHz, pre. OFF, 16dB S+N/N) 0.5 uV (0.05~0.5 MHz, pre. OFF, 16dB S+N/N) 0.35 uV (0.5~30 MHz, pre. OFF, 16dB S+N/N) |
SSB / ISB [2] | 0.56 uV (0.5~30 MHz, pre. OFF, 10dB S+N/N) |
AM | 1.6 uV (0.5~30 MHz, pre. OFF, 10dB S+N/N) |
FM | 2.5 uV (0.5~30 MHz, pre. OFF, 10dB S+N/N) |
Selectivity [3] | |
CW (300 Hz) | 0.35 KHz (-6dB)
0.45 KHz (-60dB) |
CW (1 KHz) | 1.1 KHz (-6dB)
1.5 KHz (-60dB) |
SSB (3.2 KHz) | 3.2 KHz (-6dB)
4.0 KHz (-60dB) |
AM (6 KHz) | 6.0 KHz (-6dB)
7.5 KHz (-60dB) |
FM (16 KHz) | 16 KHz (-6dB)
20 KHz (-60dB) |
IF filter ultimate attenuation | |
> 80 dB | |
IF filter group-delay | |
< 0.06 ms (-3dB band) | |
RF preamplifier | |
Yes | |
NF (Noise Figure) | |
14 dB (preamplifier OFF)
11 dB (preamplifier ON) |
|
IP2 (2nd order intercept point) | |
+60 dBm | |
IP3 (3rd order intercept point) | |
+30 dBm (preamplifier OFF) | |
Image rejection | |
90 dB typ | |
IF rejection | |
> 85 dB (90 dB typ) | |
Spurious response | |
< 0.4 uV (referenced to RF input) | |
AGC (Automatic Gain Control) | |
Adjustable | |
Frequency stability | |
± 0.7ppm with temperature from 0°C to +50°C
± 0.2ppm with temperature from 0°C to +50°C [4] |
|
Synthesizer settling time | |
10 ms | |
IF (Intermediate Frequency) | |
1° | 45.455 MHz |
2° | 455 KHz |
3° | 25 KHz |
Features |
Memory | |
---|---|
100 regular memories | |
Display | |
1 Hz frequency resolution | |
Antenna | |
BNC 50Ω | |
Power supply | |
97 ~ 253 VAC | |
Power consumption | |
35 W typ | |
Audio power | |
1 W on 8Ω | |
Audio output | |
Jack 6.35 mm headphone | |
Connections | |
RS232C (remote control)
BNC (IF 455 KHz output) BNC (monitor 455 KHz output, BW 30 KHz) BNC (frequency reference input) Terminal jack (audio |
Mechanical and environmental data |
Operating temperature | |
---|---|
from 0°C to +50°C | |
Dimensions | |
482 (W) x 133 (H) x 508 (D) mm | |
Weight | |
6.78kg |
- 300 Hz bandwidth.
- 3200 Hz bandwidth.
- Standard values, 66 bandwidths are available between 0.056~16 KHz.
- With WJ-8711/REF optional reference.
Updated | Complete | UK - NORTHERN IRELAND
378 pages | 300+ Airports and Airfields
Voice com. | ACC | FIC | VOLMET | ACARS | VDL | ILS | VOR | DME
The WJ-8711A uses the SDR technology in hybrid form, ie adopting a superheterodyne configuration with the last IF digitized to perform the filter and demodulation functions. The equipment has professional features both in terms of RF performance and reliability, the manufacturer Watkins-Johnson has in fact designed this model mainly to the military and for this reason the operational specifications include resistance to vibration, shock, humidity, atmospheric pressure, storage temperature according to the MIL-STD-810D standard. The receiver offers a lower limit of only 5 KHz, although tuning can go down to 0Hz under the operational aspect. In fact the WJ8711, starting from hundreds of KHz and up to the 30 MHz, guarantees a precision in the detection of the amplitude displayed by the S-meter equivalent to a measuring instrument in standard S-points/dBm. The automatic gain control operates in analog and digital sections for a total of 1OOdB, the response time is extremely rapid, taking 5 milliseconds while the release time is selectable between slow, medium and fast. After the ADC conversion stage operating at 100 Ksps with 16 Bit resolution a DSP processor is responsible for defining selectivity and making the PBT, notch, BFO adjustable functions available (within ±8000Hz in 10Hz steps), multi-mode demodulation including also the ISB or independent sidebands with two audio channels.
The radio has 66 different bandwidths to choose from a minimum of 56 Hz to a maximum of 16 KHz, the form factor of the filters is always better than 1.5 at 1 (6/60dB). In the following table the nominal bandwidths referred to 3 dB:
Bandwidth | |||
---|---|---|---|
56 Hz | 113 Hz | 225 Hz | 450 Hz |
63 Hz | 125 Hz | 250 Hz | 500 Hz |
69 Hz | 138 Hz | 275 Hz | 550 Hz |
75 Hz | 150 Hz | 300 Hz | 600 Hz |
81 Hz | 163 Hz | 325 Hz | 650 Hz |
88 Hz | 175 Hz | 350 Hz | 700 Hz |
94 Hz | 188 Hz | 375 Hz | 750 Hz |
100 Hz | 200 Hz | 400 Hz | 800 Hz |
900 Hz | 1800 Hz | 3600 Hz | 7200 Hz |
1000 Hz | 2000 Hz | 4000 Hz | 8000 Hz |
1100 Hz | 2200 Hz | 4400 Hz | 9600 Hz |
1200 Hz | 2400 Hz | 4800 Hz | 10400 Hz |
1300 Hz | 2600 Hz | 5200 Hz | 11200 Hz |
1400 Hz | 2800 Hz | 5600 Hz | 12000 Hz |
1500 Hz | 3000 Hz | 6000 Hz | 12800 Hz |
1600 Hz | 3200 Hz | 6400 Hz | 14400 Hz |
16000 Hz |
The front-end is characterized by excellent IP2 and IP3, to shift the dynamic range at the input you can insert a 10dB preamplifier or a 15dB attenuator. However, there is not a preselector stage which is supplied only as an optional accessory (model HF-8711 - PRE), this integrates no less than eleven preset bandpass cells with a width of less than one octave and can be switched off when necessary.
The receiver uses a high stability TCXO with ±0.7ppm for an excursion of 50°C in temperature. Installing the internal option WJ-8711 - REF the stability can be further improved. An input is also dedicated for an external frequency reference that accepts signal at 1, 2, 5, 10 MHz. The receiver automatically detects its presence and adopts this master signal. The audio is usable for loudspeakers, headphones and via fixed-level outputs for connection to recording systems. The volume control is separate for audio intended for the speaker and headphones. Two IF outputs at 455 KHz with different bandwidth makes possible to connect a spectrum-scope and even a specific demodulators that make use of the selectivity determined by the WJ-8711A. An RS232 serial interface with baud rates of 75/9600bps allows remote use of this WJ. The apparatus has standard size measurements so as to be possibly mounted in a standard 19 inch rack.
WJ-8711A performance and practical notes :
The 8711A is a superior class receiver for reliability and repeatability in performance. Its characteristics are similar to the WJ-1000A intended for the civil market, but there are significant variations with respect to the latter as the maximum bandwidth of selectivity. Having been designed in the first half of the '90s this Watkins-Johnson inevitably suffers from some weaknesses when compared to the most recent radio-set but expresses the ergonomics guaranteed by a front panel where each command is rationally enslaved to specific buttons and rotary controls.
WJ-8711A price
We have collected for your convenience the Watkins Johnson WJ8711 sale price (UK Pounds) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.
Price | Date | Condition |
GBP 1430.00 (1595EUR) |
2020-nov |
Second Hand With preselector |
GBP 1593.00 (1790EUR) |
2019-may |
Second Hand With preselector |
GBP 1570.00 (1999USD) |
2019-apr |
Second Hand With preselector |
WJ-8711A review
Sensitivity | |
Selectivity | |
Dynamic range | |
Spurious response | |
Audio | |
Signal functions | |
Control functions | |
User friendly | |
Stars: 1=insufficient | 2=just sufficient | 3=mediocre | 4=good | 5=excellent |
Your opinion on merits, defects, experiences, with this radio set is welcome. Write your review, after a technical evaluation by our staff if found suitable will be published on this page. We thank you for your precious contribution.