TitanSDR

Enablia TitanSDR is an effective tool for surveillance and monitoring of the radio spectrum and can be usefully employed in the following areas: Homeland security and foreign intelligence, SIGINT and COMINT, military communications, environmental protection from electromagnetic pollution, detection of interfering or illegal electromagnetic emissions. TitanSDR is a Software Defined Radio multichannel receiver for parallel wideband (WB) acquisitions over the HF band, allowing simultaneous monitoring of as many as 40 narrowband (NB) channels. It can be operated by a commercial personal computer through standard USB 2.0 interfacing. Spectrum and waterfall plots are provided for WB and NB channels, of both RF and demodulated audio. WB channels can be recorded on PC hard disk for later replay. NB channels can be recorded in parallel into audio wav files. Demodulation is supported for main radio formats. Interface to external software decoders can be through VAC (Virtual Audio Cable) or LAN Ethernet. Recording of both WB and NB channels can be scheduled, even to happen just on specific days of the week.

TitanSDR control software with panoramic scope, top, wideband and narrowband scope, down left and right side

On TitanSDR innovative pre-processing based on filters banks was implemented on FPGA, instead of conventional DDC (Digital Down Conversion), allowing for flexible partitioning of the acquisition bandwidth into WB channels and permitting tens of NB channels with reduced impact on CPU, even during replay of WB channels.

TitanSDR preselector :

Front-End controls allow to set the receiver input (HF or IF) and the attenuation to HF input. The preselection filters are as follow:

As observed, the bandwidth is much less than one octave, for best second order intercept (IP2). The operator can also switch-off the preselector by directly connecting the antenna input to the next stages, in this mode TitanSDR is used as a broadband spectrum analyzer from 9 KHz to 40 MHz with a resolution (RBW) of only 305 Hz.

TitanSDR other features :

• Version

  The basic version of the TitanSDR come with four Wideband channels, eight Narrowband channels (to be allocated on Wideband channels) and VAC (virtual audio) interfaces to third party software decoders. The TitanSDR-Pro come with four Wideband channels, 40 Narrowband channels, VAC interfaces to third party software decoders, LAN control and plug-in software interfaces.

• Wideband channels (WB)

  Bandwidths 312,5 / 625 / 937,5 / 1250 / 1562,5 / 1875 and 2187,5 kHz. Maximum Total Bandwidth 2187,5 / 1875 / 1562,5 and 1250 KHz for 1, 2, 3 and 4 Wideband channels, respectively.

• eSSB

  TitanSDR have eUSB and eLSB mode, which is USB/LSB selectable sync detection.

• Spectrum scopes

  Refresh rate 19 Hz. Panoramic scope with 0-32 or 0-40 MHz range. Wideband scope with 312.5-2187.5 kHz range, min RBW 19.07 Hz, spectrum & waterfall with customizable palette. Narrowband scope (RF) with 39.06 kHz range, min RBW 19.07 Hz, spectrum & waterfall with customizable palette. Narrowband scope (Audio) with 5512.5-22050 Hz range, RBW 5.4-21.5 Hz, customizable palette.

• Recording

  Up to 4 Wideband channels. All Narrowband channels (.wav files). Scheduler function: recording at programmable time intervals, also daytime periodic tasks with selectable days of week.

• Memories

  Saving allowed with frequency, bandwidth, mode, entry time, entry date, callsign, ITU code, station and user description.

TitanSDR price

We have collected for your convenience the Enablia TitanSDR sale price (UK Pounds) and its trend over time. Useful to guarantee a cheaper purchase of this radio and to put it for sale in the second-hand market. Of course offers, accessories, warranty terms and conditions can lead to different figures.

Price	Date	Condition
GBP 1199.00 (1380EUR)	2018-nov	Brand-new With 220VAC linear power supply, USB 2.0 Cable
GBP 1715.00 (1970EUR)	2018-oct	Brand-new TitanSDR-Pro version With software package, 220VAC linear power supply, USB 2.0 Cable